Basic System Requirements

Please note that the system requirements listed below are the minimum requirements needed to operate Cyberware hardware and software. These specifications should be used only as a base to work from.

 

USB-Based Scanners

  1. Pentium CPU Running At 2.6GHz or Higher
  2. Windows Operating System:
    • Windows VISTA and other 64-bit operating systems are not supported
    • Windows XP Professional With Service Pack 2.0 or Higher
    • Windows 2000 Professional With Service Pack 2.0 or Higher
  3. Ethernet Network Interface Card and Drivers
  4. Dedicated, Accelerated 3D-Graphics Card and Drivers:
    • Intel Express Chipset Family not supported (965, 963, ...)
    • Must Support OpenGL
    • Monitor and Graphics Adapter must support a resolution no less than 1600 × 1200
  5. 1Gb RAM
  6. 400Mb Free Hard Drive Space
  7. CD-ROM Drive
  8. Internet Access During Installation
  9. Three- (3) Button Mouse
  10. 1 Free USB 1.0 Port For Each Motion Platform
  11. A Dongle (USB or Parallel) Is Required If the System Will Be Connected to a Laptop Computer
  12. Adaptec SCSI Card With ASPI Layer Support (SCSI-Based Scanners ONLY)
  13. 1 Free SCSI Address For Each Motion Platform (SCSI-Based Scanners ONLY)

SCSI-Based Scanners

  1. Pentium CPU Running At 2.6GHz or Higher
  2. Windows Operating System:
    1. Windows VISTA and other 64-bit operating systems are not supported
    2. Windows XP Professional With Service Pack 2.0 or Higher
    3. Windows 2000 Professional With Service Pack 2.0 or Higher
  3. Ethernet Network Interface Card and Drivers
  4. Dedicated, Accelerated 3D-Graphics Card and Drivers:
    • Intel Express Chipset Family not supported (965, 963, ...)
    • Must Support OpenGL
    • Monitor and Graphics Adapter must support a resolution no less than 1600 × 1200
  5. Adaptec SCSI Card With ASPI Layer Support
  6. 512Mb RAM (1Gb for a 3030/HRC or sRGB)
  7. 400Mb Free Hard Drive Space
  8. CD-ROM Drive
  9. Internet Access During Installation
  10. Three- (3) Button Mouse
  11. 1 Free SCSI Address For Each Motion Platform
  12. A Dongle (USB or Parallel) Is Required If the System Will Be Connected to a Laptop Computer