SCSI Installation

These instructions are for Windows-based scanners and assume a working knowledge of Windows and general workstation setup procedures. Complete the installation of the hardware and software in the order presented within this document.

IMPORTANT:
The motion platform and SCSI interface must have been turned on and operational prior to booting the host workstation in order for the DigiSize software installer to properly function.

This installation guide assumes that you will have access to a CD-ROM that was supplied to you upon delivery of your Cyberware Digitizer. If you do not have access to this CD-ROM, please consult with Cyberware Support for more information.

Overview

The following instructions are broken into the sections below and should be followed in the order presented here:

  1. Pre-Installation Instructions
  2. Motion Platform Assembly Instructions
  3. Install DigiSize
    1. Install the Configuration Files
    2. Setup the ASPI Layer
    3. Setup the SCSI Device
  4. Install the headus tools
  5. License Key Installation
    1. Standard Licensing Setup and Installation
    2. Dongle Setup and Installation
    3. License Server Setup and Installation (User Name and Password Required)
  6. Final Setup
    1. DigiSize Shortcut Setup
    2. Shortcut Start In Setup
  7. User Guide Installation
    1. DigiSize
    2. headus Tools
  8. Verify the Operation of the System

Troubleshooting

If you run into difficulty while installing a scanner, please consult the Troubleshooting Guide.

Software Removal

For information on software removal, please consult this section of the user guide.